Commit Graph
12 Commits
Author SHA1 Message Date
julian.kiedaischandClaude Opus 5.5 7dac57cbbe feat(core): the pages of routers and home routers after Java, measured against Java
Routers and home routers start a web server on port 80 with Java's index,
log and routes pages in the project's language (routerPages.ts); the
firewall keeps a log per node that outlives a new start; RIP routes carry
the telling router's public address. TCP counts sequence numbers and
segments in Java's characters, not bytes. RouterWebRun records six stories,
with firewalls now built by ScenarioNetwork. Not taken from Java: its router
server sometimes never listening (a race in setAktiv), and </titel>.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 17:41:52 +00:00
julian.kiedaischandClaude Opus 5.5 21a404693c feat(core): the packet capture's table after Java's Lauscher, measured against Java's own tables
captureRows.ts builds Java's rows per frame (Lauscher.datenVorbereiten):
Ethernet; ARP, ICMP or IP; TCP or UDP; the data with Java's protocol
recognition; with addresses and ports or ports only. The comment stays
structured; captureCommentText says it with given words and numbers.

ScenarioNetwork writes Java's finished tables per card (Lauscher.getDaten,
German locale); all runtime runs are recorded again, NatRun has ttlOut.
expectSameCaptures compares both views for every frame. Fixed where the
engine differed: an ARP request's target MAC is the broadcast address,
an ICMP error's identifier and sequence number are 0 (RFC 792), and host
unreachable from a router carries the packet as forwarded. Not taken:
Java's lower-case broadcast address in a reply to 0.0.0.0, and the typo
'Exeeded'. RIP keeps its recordings: Java's staggered router start now
gives a different startup on this machine.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 15:11:05 +00:00
julian.kiedaischandClaude Opus 5.5 a88fa1512c feat(core): sends return at once and go through Java's transport thread
A send hands its frame to the card and returns, as in Java; the frames
travel while the clock advances. Swift's send ran the network until every
frame had arrived; the option swiftSends keeps that for the Swift
comparison. Waiting calls (TCP connect, acknowledgement) now run event by
event until the answer instead of to the timeout.

UDP and TCP send through a thread per node and protocol (Java's
TransportProtokoll): one segment after the other; while IP waits for ARP,
the next send blocks and a segment from an event queues behind it. Senders
that wait take their turns in the order they came (a fair lock; Java's
leaves the order to chance).

All four ArpRun stories now match Java FILIUS, including when each call
returns. Tests let frames arrive explicitly with letFramesArrive.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 17:49:05 +00:00
julian.kiedaischandClaude Opus 5.5 dbbc1fd70d feat(core): ARP after Java, measured with Java FILIUS
An ARP lookup asks, waits a round trip, asks once more and gives up after
another round trip; then host unreachable, observed at the sender itself or
sent back by the router (for ICMP only for an echo request). A waiting
sender wakes after what else happens at that time. A ping then waits a
round trip for its answer, counted from when it left. Swift asks twice at
once while events run and lets the packet wait without end when the
address exists anywhere in the network; the option swiftArp keeps that for
the Swift comparison, and three scenarios are compared with Swift until the
trace where ARP fails or a ping goes unanswered.

arpJava.test.ts compares ArpRun: both pings match; the two UDP stories wait
for Java's transport thread (next step). DNS without a server now matches
Java too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 17:11:23 +00:00
julian.kiedaischandClaude Opus 5.5 24ebcea67f test(java-oracle): DnsRun records DNS as Java FILIUS runs it
A resolver's lookup on the new dns-lan network (A, MX, a referral by NS,
an unknown name, a missing server): every frame and the call's result.
ScenarioNetwork installs a scenario's DNS servers. The Swift comparison
reads only scenarios with a Swift result.

Measured: Java's text messages (ID=... QR=... header, question and record
lines), no question in the answer, RCODE 0 always, a referral in the answer
section, an iterative resolver waiting 5 RTT per query.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 16:46:07 +00:00
julian.kiedaischandClaude Opus 5.5 efc7c440f6 feat(core): a cable carries one frame after the other, as in Java
Java's SimplexVerbindung sleeps a cable's delay with the port's buffer
locked: frames on one cable leave one after the other, and a frame shows
in the packet log when it leaves. The engine now queues a frame in the
output buffer until the one before has arrived (ethernetLinkDeparture).
Swift sends a cable's frames at once; the option swiftCables keeps that for
the Swift comparison, which goes on checking everything else trace by
trace.

With the queue, the Java comparisons match within 120 ms (was 200); a
state of the TCP stories within 250 ms, where the engine's calls block
one after the other.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 16:37:45 +00:00
julian.kiedaischandClaude Opus 5.5 cec0a92f95 feat(core): TCP timing and closing after Java, measured with Java FILIUS
TCP follows Java's TCPSocket where it differs from Swift: each attempt and
TIME_WAIT wait three round trips that follow the speed (8250 ms at 90 %),
counted from when the segment is handed down, before ARP; the next segment
ends TIME_WAIT; the other end closes by itself on FIN; data no one
acknowledges closes with FIN; the accepted socket has the listener's
initial sequence number, and the listener takes the next.

Not taken from Java: three SYNs, not one (Java's retry loop ends after
the first timeout), named in tcpJava.test.ts as JAVA_BUGS.

tcpJava.test.ts compares TcpRun's three stories frame by frame and state
by state; the Swift comparison only checks that the TCP scenarios differ.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 11:17:44 +00:00
julian.kiedaischandClaude Opus 5.5 ed437f9b5c feat(core): DHCP client after Java, measured with Java FILIUS
The client follows Java's DHCPClient instead of Swift: one DISCOVER or
REQUEST per attempt, an answer that does not fit is read and dropped, the
ARP check waits a round trip (an answer for the address ends it at once,
then DECLINE), a timeout repeats the state's message, and the fifth turns
to a link-local address 169.254.1.x/16 (ARP probe, ARP reply to all); no
old address is given back. DHCP round trip times follow the speed as in
Java (50 cables, 2750 ms at 90 %; Swift: fixed 2500 ms).

Not taken from Java: the client gives up after five occupied link-local
addresses (Java searches on without end), and an ARP packet for another
address does not end the check.

dhcpJava.test.ts compares the four DHCP scenarios with DhcpRun's Java
runs; the Swift comparison only checks that they differ.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 10:50:30 +00:00
julian.kiedaischandClaude Opus 5.5 396dbacfc5 feat(core): DHCP in the simulation core, as in Swift
engine.ts ports Swift's "DHCP server and automatic client": an active
server listens on port 67 from the start and offers a static assignment
before its range, round from the address after the last one offered;
offers last 10 s, dynamic leases a day, and a server whose offer another
server beat blacklists that address for a while. A client starts as an
event: DISCOVER, OFFER, a check by ARP, DECLINE, REQUEST, ACK or NAK,
2.5 s per wait, and after ten failures its old address back. The snapshot
carries the DHCP settings of clients and servers.

Four scenarios match the Swift engine. One Swift error is named in the
oracle test: a client run directly is advanced a second time, to FINISH,
by the server's answer within its own DISCOVER, and the outer run then
writes back its stale copy of the status (Swift's value types); the
address and every trace agree, only the reported status is wrong in
Swift. Swift's three DHCP engine tests are ported, with tests for
stopping and the message format. 15 mutation probes, 14 caught; the other
concerns the home router, which runs only once NAT is ported.

Two departures from Java remain, to be fixed next: from the event queue
the client's ARP check does not wait, so an address conflict is never
found, and each answer that wakes the client makes it send its state's
message again (a second DISCOVER and REQUEST, the second answered with
NAK). Java waits a round trip and sends once per attempt.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 10:17:36 +00:00
julian.kiedaischandClaude Opus 5.5 12849b1535 feat(core): TCP in the simulation core
engine.ts ports Swift's "Java-compatible TCP sockets" in one piece, since
half a state machine could not be checked: server and client sockets (a
free port from Java's random numbers on their own seed), the three-way
handshake with its result (connected, invalid socket, unreachable, timed
out), segments of 1460 bytes, messages up to the push, a timeout of
3 × 2.5 s with at most three attempts, closing through every Java state
including TIME_WAIT (2.5 s), sequence numbers modulo 2^32.

Three scenarios match the Swift engine trace for trace: a LAN with data
over three segments, closing from both ends, a closed port and an
unreachable host; two networks through a router with a firewall rule,
data lost until the connection closes, and an accepted socket that does
not hold the port of its closed listener; CLOSING, reached by a lost FIN.
The engine delivers a FIN within the same close, so both ends close at
once only with packet loss; an empty message does not arrive in Swift (it
does not advance the sequence number), nor here.

Swift's four TCP engine tests are ported, with tests for stopping, a
foreign SYN+ACK at a listener and the flag names. 17 mutation probes, 16
caught; the other (delivered, not waited, not connected gives unreachable)
cannot be reached through Swift's engine, which never sends a reset and
always acknowledges correctly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 10:03:16 +00:00
julian.kiedaischandClaude Opus 5.5 e80be3bbdf feat(core): UDP sockets in the simulation core
engine.ts ports the UDP part of Swift's "UDP sockets and Router RIP": a
socket bound to a given port or to a free one drawn from 49152–65534 with
Java's random numbers on Swift's seed; sending, also as a limited broadcast
on every interface (or the bound one) with TTL 1; delivery into the queue
of every socket on the destination port, which then answers to the last
sender; receiving, with a timeout that advances the virtual clock; closing.
Stopping forgets sockets and queues. RIP stays not ported; Swift's DHCP
handling of a datagram has nothing to do until DHCP is in the snapshot.

The oracle gets the steps bindUdp, sendUdp, receiveUdp and closeSocket on
both sides and reports the sockets. Two new scenarios — a LAN, and two
networks through a router with a UDP firewall rule and a broadcast that
does not cross it — match the Swift engine trace for trace, the random
ports included. Swift's four UDP engine tests are ported, with a test for
stopping. 11 mutation probes were all caught (one only after the stop test
was added).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-30 09:54:04 +00:00
julian.kiedaischandClaude Opus 5.5 5c16cf18b4 test(core): Swift oracle — the filius-ipad core built on Linux as the reference
tools/swift-oracle builds the unchanged Swift runtime (pinned 3b5ded0)
in Docker and replays JSON scenarios; the TypeScript engine must produce
the same trace events, results and end state. Five scenarios, 884
events, identical.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-29 19:33:14 +00:00