Measured first: SheetRun now types into FILIUS' router and home router
panels, records five forwarding tables (holeTabelle) and steps in the
panel's table. Java turns a card address that passes the pattern but not
IP.ipCheck (".0.0.1") into null and the router panel throws; an empty
gateway is marked red yet taken; a refused table cell is stored as null;
a home router's DHCP client leaves its DHCP server running. None of the
nulls is adopted. The core's routeTableRows matches all five tables.
- doc: card addresses (the first card mirrored in the device's settings),
router gateway, RIP, manual routes (a new row once all four cells pass,
a cell, removal); the sheet reads cards with what their cable joins and
the whole table
- editor: Java's tabs (general, each card titled by its address, the
forwarding table greyed out under RIP; general, LAN, WAN on a home
router); the open card's cable drawn active in Java's green
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Measured first: the new oracle SheetRun types 77 texts into FILIUS' own
settings panels and records what was marked red, what the device took and
what the field showed afterwards. Java's two judgements disagree (red text
taken, black text refused, any int as a modem port, a refused text dropped
without a word); here one rule decides both (packages/doc fields.ts), a
refused text stays marked in the field, and only what Java's model accepts
reaches the document.
- doc: settings.ts (name, label policy, addresses, IP forwarding, DHCP
stopping the own DHCP server, LAN/WLAN with the wireless connection,
switch SSID dropping its wireless hosts, retention time, cloud, modem
port as its pair), sheet.ts (what the sheet shows)
- fls: modemPair/modemPort in one place
- editor: DeviceSheet beside the surface or below it on a phone, opened
with the selection; every change one undo step
- not adopted from Java: the name overwritten by the MAC address, the
access point search depending on unrelated devices
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new device is what Java's palette makes, measured with the new oracle
NewDeviceRun (every kind and router size saved as FILIUS saves). Devices
move to whole pixels and go with their cables; a cable takes the first free
port, a home router's WAN port unless its LAN port is asked for, a wireless
host only joins a switch, two devices join once, each refusal named with
Java's message. Each person's undo takes back their own changes only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
packages/editor (React 18, Vite) draws a document as Java FILIUS does: Java's
default hardware icons, the device button of JSidebarButton, cables as
JCablePanel's quadratic curve between the buttons' middles, wireless cables
dashed, documentation items below. The surface moves with mouse and finger
(the pointer captured only once it moved) and zooms with Ctrl and the
wheel, a trackpad pinch, two fingers and the zoom bar; the first view shows
all. German and English catalogs with Java's device names, the dashboard's
colour tokens, the bridge with its origin check. packages/doc gets the
drawing's light view of a document.
Java's Switch.cloud (the Internet in the examples) was lost on reading; it
is now read, kept in the model and written, with FlsOracle and the corpus,
written and exported checks renewed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A web page by its DNS name (internetwork_komplett), an e-mail between two
networks through NAT and MX relay (Internet_Komplett_..._DE), a file found
and fetched with Gnutella across a router (zwei_rechnernetze_komplett):
ExampleRun records frames, tables, program lines and end states; the core
plays the same calls and matches card by card. Equal RIP ties take Java's
choice, RIP beacons are left out, the search's two connections compared
flow by flow. Also: a core test that an equal RIP route from another router
neither replaces nor refreshes the route, and nine stale type errors in
core tests fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GnutellaRun adds a line of four peers: a search goes on as a query, each
peer answers with a hit for each matching file and the hits come back the
way the query came; a hit's file is fetched by HTTP on port 6346. The
file type names of the model move from the project export and import into
the core, so that the download uses them too.
Departures from Java: a peer that sent hits keeps its connection, so that
the hits of farther peers come back too (Java closes it and loses them),
and sizes are in characters.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GnutellaRun lets Java's PeerToPeerAnwendung join peers on terminal-net.
The core's gnutella.ts does the same: a ping in Java's text format to
port 6346, a pong back, the ping sent on to the other peers and their
pongs back the way it came, at most the program's number of peers.
Departure from Java: a ping that comes a second time gets no pong and
its connection stays (Java's worker throws on the missing pong).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
FileCases does what the windows of FILIUS' file explorer and text editor
do to a host's files: new folder, delete, copy, cut and paste, rename,
import, save and save as. The core's filePrograms.ts does the same on the
node's file system; the file system renames an entry in its place, as
Java's tree does.
Departures from Java: a folder name that comes to no name makes nothing,
a paste onto a name there already is refused, a rename to a name with a
slash or blanks at its ends is refused and one of the case only is done,
save as and import onto a folder's name are refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The account file's writer moves from the export (packages/fls) into the
core, so that the export and the running server write the same. The
server writes the file at its start and whenever its accounts change.
EmailRun now records Java's file as it left it and as Java writes the
accounts it ended with; Java leaves the notice to a local sender out until
its next write.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TerminalRun adds nine stories: traceroute in the LAN, through the router,
unreachable, without a route, to no one, to the host itself, errors and
Ctrl+C; tcpdump on two hosts. traceroute counts failures across hops as
Java does and takes an error that carries its probe; tcpdump tells each
frame's highest capture row with its time of day, at once.
Departures from Java: traceroute tells its summary before the end mark
(Java after it, where its window shows no text) and calls a host at the
20th hop reached. arpsend is not built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TerminalRun types lines into Java's command line on terminal-net at set
times; the engine types the same lines. New in the engine: an ICMP echo
in a program's thread (the first ICMP message after the send, whatever
it is), Java's route choice, the ARP table with Java's broadcast row, DNS
in a program's thread, ICMP broadcasts of a node's own network, and an
ARP wait that ends after what else happens at that millisecond.
Departures from Java: an echo is answered from the address asked
(RFC 792), network unreachable carries the packet with its sender, ping
names the host and takes only -b before it, arp and netstat list in the
order learned, netstat lists a UDP server's listening socket only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The terminal splits a line as Java's window does and runs ls, cd, pwd,
mkdir, touch, cp, mv, rm, cat, test, help, ipconfig and route on the
node's files, which are the project's own. Its texts are generated from
the bundle Java loads. TerminalCases feeds Java's Terminal without a
network (16 cases, de and en); eight cases name Java bugs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The program sends to its account's SMTP server, one connection for each
recipient, and fetches its mails by POP3; the server now sends mails on
to other domains by MX and returns notices to their senders. The
program's folders are in the snapshot and go back into the project.
EmailClientRun plays six stories with two servers; the mail oracles run
in the language's locale, so Java's notice dates match the core's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SMTP on port 25 stores mails for the domain's accounts as Java reads
them anew and tells a local sender of unknown recipients; POP3 on port
110 hands them out. The mailboxes are in the snapshot and go back into
the project. EmailRun plays four stories over the network; MailCases
feeds Java's workers without one (26 cases, de and en). 18 cases name
Java bugs that the core does not take.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The page konfig changes the firewall at run time (into the snapshot, back
into the project through projectWithSimulationChanges). KonfigCases feeds
Java's plug-in directly (25 cases, de and en); RouterWebRun plays two
stories over the network. Ten Java bugs named, not adopted. The web server
answers a method not written GET or POST with 501, as Java does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Routers and home routers start a web server on port 80 with Java's index,
log and routes pages in the project's language (routerPages.ts); the
firewall keeps a log per node that outlives a new start; RIP routes carry
the telling router's public address. TCP counts sequence numbers and
segments in Java's characters, not bytes. RouterWebRun records six stories,
with firewalls now built by ScenarioNetwork. Not taken from Java: its router
server sometimes never listening (a race in setAktiv), and </titel>.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The servers share ServerAnwendung's frame (server.ts); the web server serves
/webserver with virtual hosts, the browser loads a page and its images over
one connection to port 80 (web.ts); HTTP in Java's text form (http.ts).
WebRun records eleven stories on the new web-lan network, with the server's
files; webJava.test.ts plays them card by card. A program's close is a
request, as Java's schliessen. Not taken from Java: /../ serving any file of
the host; an unreadable request closing the connection without a word.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Programs run as generators that yield what they wait for (threads.ts); the
engine resumes them after every event. TCP connect, send, receive, accept
and name resolution exist as such steps; the blocking calls wrap them.
EchoRun records eight stories in Java FILIUS, frames, tables and each
program's window lines; echoJava.test.ts plays them card by card. Not
taken from Java: a connection without a route hangs for ever; a server
switched off leaves its connections' last FIN unanswered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ExampleRun opens an example as FILIUS opens it (SzenarioVerwaltung.laden
into the window's lists), starts it as the action mode does, plays a
story and writes every card's frames and tables, the calls, the
addresses and the RIP tables' changes. examplesJava.test.ts reads the
same file with this package's reader and runs it in the core
(projectSnapshot, new): routing (internetwork_komplett), DHCP
(einfaches_rechnernetz_komplett), DNS (dns_server), NAT
(nat_with_mapped_port) and firewall (Internet_Komplett_..._DE) match
card by card.
Found and fixed: a host's ipForwardingEnabled, which Java saves and
obeys, was unknown to the reader, the model, the core, the writer, the
export and FlsOracle; and Java's ARP learns only from a request for its
own address or a reply. Named Java bugs: a ping without a gateway throws
a NullPointerException; a home router drops the answer of a second
remote end. Open: Java picks between equally long RIP routes by thread
timing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
captureRows.ts builds Java's rows per frame (Lauscher.datenVorbereiten):
Ethernet; ARP, ICMP or IP; TCP or UDP; the data with Java's protocol
recognition; with addresses and ports or ports only. The comment stays
structured; captureCommentText says it with given words and numbers.
ScenarioNetwork writes Java's finished tables per card (Lauscher.getDaten,
German locale); all runtime runs are recorded again, NatRun has ttlOut.
expectSameCaptures compares both views for every frame. Fixed where the
engine differed: an ARP request's target MAC is the broadcast address,
an ICMP error's identifier and sequence number are 0 (RFC 792), and host
unreachable from a router carries the packet as forwarded. Not taken:
Java's lower-case broadcast address in a reply to 0.0.0.0, and the typo
'Exeeded'. RIP keeps its recordings: Java's staggered router start now
gives a different startup on this machine.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Java's RIPTable.check marks an expired route only at the router's next
beacon, up to some 35 s late. The engine schedules each router's first
expiry, marks the route with 16 hops at that time and sends its table
at once, as after any change (better than Java where Java only samples,
decided 01.10.2026). ripJava's expire story is compared up to the
expiry and then checks that R2 marks the route at its time and R1 a
cable later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Java's GatewayFirmware.checkNAT and SwitchFirmware.checkSAT look every
second from the start, so an entry goes up to a second late. The engine
expires both exactly at their age: better than Java where Java only
samples, as long as saved files stay compatible (decided 01.10.2026).
The switch did so already; its departure is now named in the code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The engine keeps Java's packet capture (capture.ts): per network card
every frame it sent (when it leaves on the cable) or received (also one
for another card), once, with time and number; switches log nothing;
frames the packet loss dropped are kept apart; the capture outlives a
stop and a new start, as in Java, until clearCapture. Per port instead
of per MAC, at most 10,000 frames a card.
expectSameCaptures compares each card's capture with Java's list of that
card in the ARP, WLAN, DNS, TCP, NAT, RIP and single-client DHCP runs.
It found that ScenarioNetwork ignored a switch's learning time (Java ran
300 s, the core the scenarios' 5 s); the oracle sets it now, and the TCP
and DHCP runs are recorded again. A core test found that a new start
numbers frames from 1 again and the capture took them as seen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WlanRun pings on the new network wlan-lan: over wireless cables, over a
plain cable, and to and from a notebook on the switch's SSID without a
cable. The engine matches Java without a change: it runs the links only.
Swift's wirelessAssociations, which join a host to its SSID's switch at
run time, are not taken. ScenarioNetwork sets wireless cables, wireless
cards and SSIDs; a corpus test pings over the wireless cables of
multicast_server.fls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The core translates before the IP thread, as Java's NAT threads sit
between card and Ethernet: out, the WAN address and the entry's port (ICMP
keeps its identifier); in, by remote end, port and protocol, else by the
port forwarding, which then makes a dynamic entry; a ping at the WAN
address is answered by the router, packets from outside for the LAN are
dropped, both sides pass the router's firewall, TTL 1 going out gets time
exceeded. Dynamic entries expire at Java's check each second, 300 s times
the delay factor old (55 minutes at 90 %), refreshed only by what comes in.
The home router forwards as a router does.
Measured and not taken: when a LAN endpoint sends to a second remote end,
Java gives it the entry's WAN port but no entry, and the answer stays at
the router; the core adds an entry for each new remote end on that port.
The oracle now records every card of a node (the second card of routers
was missing); the ARP and RIP runs are recorded anew and still match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ScenarioNetwork builds home routers (their first card the WAN port) and
their port forwarding (portForwarding, through GatewayFirmware.setStaticNAT).
NatRun plays six stories on nat-home's network and writes the frames, the
calls and the router's NAT table: a ping, a UDP exchange, the same socket
to a second server (whose answer never reaches the LAN: Java keeps one
entry per LAN endpoint, for the first remote only), a TCP connection out,
a forwarded one in, and pings at the WAN address and past it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
RipRun runs rip-chain's three routers in Java FILIUS, each router's random
set by reflection to the core's ripSeed, and writes the frames, every
change of each RIP table and the calls. converge: the tables fill, a ping
at 45 s. expire: R3 falls silent at 10 s; R2 marks its network 16 hops only
at its own next beacon, R1 passes it on at once, the ping gets ICMP 3/0.
Both match: per sending card the same messages at the same times, every
table through the same states. The first 5 s are compared by the state the
tables reach, since Java's routers start one after the other.
Measured on the JDK: Java's pause divides nextFloat() by 3 in float; the
core does too now (a millisecond off in one draw of about 10,000 before).
Scenarios name their RIP routers in the new field rip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The resolver runs on the events now (a query, its dnsQueryTimeout, its
answer at the socket); the blocking resolveDns waits for it, and a
recursive server uses it: its own records, else the zone's name server
from its records, else its own DNS server, else a referral
(DNSServer.answerWithRemoteData).
DnsRun plays five stories on the new dns-recursive network. Measured and
not taken: a server that is its zone's name server asks itself, which asks
itself again, without end (the client times out, then every level floods
its own DNS server); Java guards only the step through its own DNS server.
The core asks itself in neither step. That story is compared up to the
client's query (JAVA_UNTIL).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every packet that comes in goes through its node's IP thread (UDP, TCP) or
ICMP thread (ICMP), as Java's IPThread and ICMPThread: deliver, answer an
echo request or forward, one after the other; while one waits for ARP, the
next wait behind it. A packet a node sends to itself is delivered at once,
as Java's IP.senden does. The transport send threads and these are one
mechanism now (handToProtocolThread).
ArpRun has three stories through the router (routedUdpBehind,
routedPingBesideUdp, routedPingBehindPing); the oracle writes ICMP frames
with type, code, addresses and sequence number. All seven ArpRun stories
match Java FILIUS.
Measured and not taken: Java's ARP wakes one waiter with notify, not the
one whose answer came; the core wakes all that wait for the address.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TcpRun loses exactly one frame (loseFirst: the card's output buffer drops
it; the sender's packet log still shows it, as with setDrop) in three new
stories: lostSynAck, lostFin, lostLastFin.
Measured: Java never repeats a SYN+ACK or a FIN. The server gives a
handshake up after one timeout (3 RTT) and closes with a FIN from SYN_RCVD
(its boundary check sometimes lets it wait twice; it means once). After its
FIN a socket waits at most five times, each wait ended by a segment or the
timeout; then it is gone. The core does the same (TCP_CLOSING_WAITS, with
TIME_WAIT in the loop) and shows CLOSED where Java leaves the state
standing (a named Java bug).
One departure: a repeated SYN in SYN_RCVD gets the SYN+ACK once more and
the wait starts anew; Java closes there, but its client never repeats the
SYN. lostSynAck is compared up to the second SYN (JAVA_UNTIL); the rest is
an engine test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A send hands its frame to the card and returns, as in Java; the frames
travel while the clock advances. Swift's send ran the network until every
frame had arrived; the option swiftSends keeps that for the Swift
comparison. Waiting calls (TCP connect, acknowledgement) now run event by
event until the answer instead of to the timeout.
UDP and TCP send through a thread per node and protocol (Java's
TransportProtokoll): one segment after the other; while IP waits for ARP,
the next send blocks and a segment from an event queues behind it. Senders
that wait take their turns in the order they came (a fair lock; Java's
leaves the order to chance).
All four ArpRun stories now match Java FILIUS, including when each call
returns. Tests let frames arrive explicitly with letFramesArrive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An ARP lookup asks, waits a round trip, asks once more and gives up after
another round trip; then host unreachable, observed at the sender itself or
sent back by the router (for ICMP only for an echo request). A waiting
sender wakes after what else happens at that time. A ping then waits a
round trip for its answer, counted from when it left. Swift asks twice at
once while events run and lets the packet wait without end when the
address exists anywhere in the network; the option swiftArp keeps that for
the Swift comparison, and three scenarios are compared with Swift until the
trace where ARP fails or a ping goes unanswered.
arpJava.test.ts compares ArpRun: both pings match; the two UDP stories wait
for Java's transport thread (next step). DNS without a server now matches
Java too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sends to addresses no card has on the new arp-routed network (ping on the
LAN and behind a router, two UDP datagrams, one behind a failing one):
frames and calls. ScenarioNetwork builds routers and their interfaces.
Measured: ARP asks twice, a round trip each, then host unreachable; the
thread that waits is the ping's caller, the router's IP thread, or the
node's transport thread per protocol, which blocks the next send.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A resolver's lookup on the new dns-lan network (A, MX, a referral by NS,
an unknown name, a missing server): every frame and the call's result.
ScenarioNetwork installs a scenario's DNS servers. The Swift comparison
reads only scenarios with a Swift result.
Measured: Java's text messages (ID=... QR=... header, question and record
lines), no question in the answer, RCODE 0 always, a referral in the answer
section, an iterative resolver waiting 5 RTT per query.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Java's SimplexVerbindung sleeps a cable's delay with the port's buffer
locked: frames on one cable leave one after the other, and a frame shows
in the packet log when it leaves. The engine now queues a frame in the
output buffer until the one before has arrived (ethernetLinkDeparture).
Swift sends a cable's frames at once; the option swiftCables keeps that for
the Swift comparison, which goes on checking everything else trace by
trace.
With the queue, the Java comparisons match within 120 ms (was 200); a
state of the TCP stories within 250 ms, where the engine's calls block
one after the other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TCP follows Java's TCPSocket where it differs from Swift: each attempt and
TIME_WAIT wait three round trips that follow the speed (8250 ms at 90 %),
counted from when the segment is handed down, before ARP; the next segment
ends TIME_WAIT; the other end closes by itself on FIN; data no one
acknowledges closes with FIN; the accepted socket has the listener's
initial sequence number, and the listener takes the next.
Not taken from Java: three SYNs, not one (Java's retry loop ends after
the first timeout), named in tcpJava.test.ts as JAVA_BUGS.
tcpJava.test.ts compares TcpRun's three stories frame by frame and state
by state; the Swift comparison only checks that the TCP scenarios differ.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three stories of socket calls on tcp-lan's network (exchange, closedPort,
lostData): every frame with TCP flags and numbers, when each call started,
returned or failed, and each socket's states. Network building and the
packet log move from DhcpRun to ScenarioNetwork.
Measured: 3 RTT per attempt (8250 ms at 90 %), an orderly close after a
failed send, TIME_WAIT of 3 RTT, the passive side closing by itself on FIN,
one SYN only (Java's retry loop ends after the first timeout).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The client follows Java's DHCPClient instead of Swift: one DISCOVER or
REQUEST per attempt, an answer that does not fit is read and dropped, the
ARP check waits a round trip (an answer for the address ends it at once,
then DECLINE), a timeout repeats the state's message, and the fifth turns
to a link-local address 169.254.1.x/16 (ARP probe, ARP reply to all); no
old address is given back. DHCP round trip times follow the speed as in
Java (50 cables, 2750 ms at 90 %; Swift: fixed 2500 ms).
Not taken from Java: the client gives up after five occupied link-local
addresses (Java searches on without end), and an ARP packet for another
address does not end the check.
dhcpJava.test.ts compares the four DHCP scenarios with DhcpRun's Java
runs; the Swift comparison only checks that they differ.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds a core scenario's network in Java FILIUS, starts it as the action
mode does and writes every frame each card saw (the Lauscher) and the
addresses at the end. References for the four DHCP scenarios: one
DISCOVER/REQUEST per attempt, an ARP check that waits one RTT, DECLINE on a
conflict, link-local 169.254.1.x after the fifth failure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
engine.ts ports Swift's "DHCP server and automatic client": an active
server listens on port 67 from the start and offers a static assignment
before its range, round from the address after the last one offered;
offers last 10 s, dynamic leases a day, and a server whose offer another
server beat blacklists that address for a while. A client starts as an
event: DISCOVER, OFFER, a check by ARP, DECLINE, REQUEST, ACK or NAK,
2.5 s per wait, and after ten failures its old address back. The snapshot
carries the DHCP settings of clients and servers.
Four scenarios match the Swift engine. One Swift error is named in the
oracle test: a client run directly is advanced a second time, to FINISH,
by the server's answer within its own DISCOVER, and the outer run then
writes back its stale copy of the status (Swift's value types); the
address and every trace agree, only the reported status is wrong in
Swift. Swift's three DHCP engine tests are ported, with tests for
stopping and the message format. 15 mutation probes, 14 caught; the other
concerns the home router, which runs only once NAT is ported.
Two departures from Java remain, to be fixed next: from the event queue
the client's ARP check does not wait, so an address conflict is never
found, and each answer that wakes the client makes it send its state's
message again (a second DISCOVER and REQUEST, the second answered with
NAK). Java waits a round trip and sends once per attempt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
engine.ts ports Swift's "Java-compatible TCP sockets" in one piece, since
half a state machine could not be checked: server and client sockets (a
free port from Java's random numbers on their own seed), the three-way
handshake with its result (connected, invalid socket, unreachable, timed
out), segments of 1460 bytes, messages up to the push, a timeout of
3 × 2.5 s with at most three attempts, closing through every Java state
including TIME_WAIT (2.5 s), sequence numbers modulo 2^32.
Three scenarios match the Swift engine trace for trace: a LAN with data
over three segments, closing from both ends, a closed port and an
unreachable host; two networks through a router with a firewall rule,
data lost until the connection closes, and an accepted socket that does
not hold the port of its closed listener; CLOSING, reached by a lost FIN.
The engine delivers a FIN within the same close, so both ends close at
once only with packet loss; an empty message does not arrive in Swift (it
does not advance the sequence number), nor here.
Swift's four TCP engine tests are ported, with tests for stopping, a
foreign SYN+ACK at a listener and the flag names. 17 mutation probes, 16
caught; the other (delivered, not waited, not connected gives unreachable)
cannot be reached through Swift's engine, which never sends a reset and
always acknowledges correctly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
engine.ts ports the UDP part of Swift's "UDP sockets and Router RIP": a
socket bound to a given port or to a free one drawn from 49152–65534 with
Java's random numbers on Swift's seed; sending, also as a limited broadcast
on every interface (or the bound one) with TTL 1; delivery into the queue
of every socket on the destination port, which then answers to the last
sender; receiving, with a timeout that advances the virtual clock; closing.
Stopping forgets sockets and queues. RIP stays not ported; Swift's DHCP
handling of a datagram has nothing to do until DHCP is in the snapshot.
The oracle gets the steps bindUdp, sendUdp, receiveUdp and closeSocket on
both sides and reports the sockets. Two new scenarios — a LAN, and two
networks through a router with a UDP firewall rule and a broadcast that
does not cross it — match the Swift engine trace for trace, the random
ports included. Swift's four UDP engine tests are ported, with a test for
stopping. 11 mutation probes were all caught (one only after the stop test
was added).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A project's own applications (classes under projekt/anwendungen, installed
on a host) are no longer left out. The decoder now keeps the Java type of
every primitive — at setters, constructor and call arguments, also through
shared ids like Integer0 — and which properties an object's own getter
made. beanCapture.ts turns a decoded bean back into what the writer writes,
with the node's system software as a mark the writer replaces by the
system software it writes; what the format cannot say is refused, not
guessed (an unresolved value, a Field, a factory-made object, an object a
getter reaches elsewhere in the file). The reader keeps own applications as
captured beans; the corpus no longer warns.
The capture first took a setter with another object's getter result for an
own getter; the round-trip test found it. The Java oracle did not show
whether an application runs on its node's system software, so a mutation
writing the mark instead survived; it now reports onItsSystem (true for all
192 applications of the corpus).
Checked by Java: from the files written again, FILIUS loads Accumulator and
Broadcast installed, switched on and on their node's system software, as
in the original. The round-trip test covers every primitive, null, a
class, an array, shared objects, getter chains, constructed elements, map
reads and static constants.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
FlsOracle now loads through SzenarioVerwaltung.laden, FILIUS's full
loading path: the archive unpacked, the project's own applications copied
where FILIUS's class loader finds them, then the configuration.
--network keeps the configuration-only load (netzwerkLaden).
On the corpus this changes two files: anwendung_komplett.fls and
multicast_server.fls then have their own applications (Accumulator,
Broadcast) installed. Java's views of the written and the exported files
are byte-equal to before: Java-FILIUS 2.14 opens our exports, with the
classes they carry, as it opens a file of its own, and sees what it sees
in the original. Until own applications on hosts are written (B2), the
reader, writer and export tests leave them out (test/ownApplications.ts);
a test checks that only those two files are touched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
exportProject.ts, step X3: the files of a PC or notebook from the model's
virtual file system under Java's root. A file's type follows from its kind:
text by a known extension (else "text"), an image or binary data by its
media type. Images and binary data are Base64 as FILIUS's
Base64.encodeBytes (iHarder 2.x) writes it: a line break after every 76
characters, also after the last full line. Without that, all 31 images of
the corpus came back with other content. A new oracle tool, Base64Cases,
has Java encode 19 lengths around the line length; javaBase64 matches all.
A router or home router keeps the files its constructor makes.
Checked by Java: every corpus file, imported, exported and written, loads
with the files of the original, byte for byte, up to named departures of
the model: files in its order (directories first, then by name), with the
type of their kind rather than the one the file named (Java itself names
them unevenly), and no router files beyond the constructor's (www.conf,
16 times). The synthetic model adds nested directories, text with and
without a known extension, a PNG, a JPEG, binary data with and without a
media type and 57 bytes, one Base64 line exactly. 10 mutation probes, each
loaded by Java, were all caught.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
exportProject.ts is the counterpart of importProject.ts: from the editor
model to the Java view topologyWriter.ts writes. Step X1, the topology:
each node becomes the Java device of its kind with name, position and label
flags; its ports become interfaces or ports; each link a cable drawn
between its nodes; each documentation item a GUIDocuItem. A port's MAC is
the one the simulation uses (the file's, or one derived from the port id);
a router's gateway and DNS server go to every interface, as Java's own
setters do (Java reads the first interface's only). A host with a wireless
card joins a switch by a wireless cable, the only wireless connection Java
makes. The import now enables a host's wireless by Java's card flag, also
without an SSID, where Swift enables it for every SSID.
Checked by Java: every corpus file, imported, exported and written, loads
in Java FILIUS to the topology of the original up to named departures of
the model (a derived MAC where Java rolls one at each load; documentation in
render order, with the model's empty text, Dialog 12 and minimum size where
Java has none or less). A synthetic model adds a label with IP and MAC,
positions between pixels, a five-port switch, a wireless notebook, a
three-interface router and a half-transparent bold text. 17 mutation
probes, each loaded by Java, were all caught.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A notebook that joins a switch's wireless network has its card marked
wireless (NetzwerkInterface.setWireless, Betriebssystem.wireless()), next
to the wireless cable. The reader did not read it, the writer did not write
it, and the Java oracle did not report it, so the Java-against-Java writer
test could not see the loss. Found while exporting the editor model: the
corpus has 18 wireless cards, one at each wireless cable.
The oracle now reports `wireless` per interface; FlsInterface has it; the
writer sets it. The synthetic topology has a wireless card; a mutation
probe that drops it is caught by Java.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
topologyWriter.ts writes the e-mail server's domain and bean accounts with
their mailboxes, and the e-mail client's three folders and address book.
The client's account is no bean (FILIUS 2.14 has no kontoListe property):
it lives in /konten.txt and is written with the files.
A Java error is not copied: older files keep recipients as strings, which
Java puts into its typed lists unchecked, and its e-mail window fails on
them. The writer writes the AddressEntry Java's own AddressEntry(String)
makes of each; a null recipient is left out. The Java oracle now reports
that reading next to each such string, and our addressEntry matches it on
all 9 in the corpus. The test names the departure (RECIPIENTS_AS_STRINGS)
and checks that it touches man-in-the-middle.fls alone.
Checked by Java against Java: every corpus file, read and written again,
loads with the same e-mail programs as the original, up to that departure.
The synthetic topology adds an e-mail server and client with an account, a
mailbox, three folders, an address book and recipients of every form. 15
mutation probes, each loaded by Java, were all caught. The writer now
writes everything the reader reads of Java's view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
topologyWriter.ts puts each installed application of a PC or notebook under
its key and gives it the system software, as installApp does, with its
settings: a server's switch and port, a client's target, DNS recursion,
virtual hosts, the peer count, the personal firewall. The applications
follow the files, as in Java's own files: the web server, the peer-to-peer
application and the e-mail server make their directories only where the
files lack them, and the DNS server reads /dns/hosts when it is installed.
E-mail accounts, messages and address books are the next step.
The Java oracle now reports a personal firewall's rules in full, not their
number (the corpus has none; its result is byte-equal).
Checked by Java against Java: every corpus file, read and written again,
loads with the same applications as the original. The synthetic topology
adds every FILIUS application with settings away from its defaults, a
personal firewall with a rule, an own index.html (Java makes no second) and
a missing /peer2peer directory, which Java makes at the end. 12 mutation
probes, among them files and applications in reverse order, each loaded by
Java, were all caught.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
topologyWriter.ts writes konfiguration.xml from Java's view of a project:
the version line, the node items (label position, device with name,
host label flags, interfaces or ports), the cable items and the
documentation items. What a device's constructor makes is changed through
getters, as XMLEncoder does, and more is added; fewer than it makes set the
list anew. Cable ends name the port objects the getters return (the writer
now names a getter's result, <void id="Port0" property="port"/>), and each
cable carries the nodes the editor draws it between.
Checked by Java against Java: every corpus file, read and written again,
loads in Java FILIUS (the oracle's loading method, --sha256 ties its result
to the written bytes) to the same devices, names, positions, interfaces,
cables and documentation as the original; so does a synthetic topology with
what the corpus never sets. The oracle and the reader now also report a
cable's drawing ends (JCablePanel ziel1/ziel2): in the corpus the nodes it
joins, for all 183 cables. Mutation probes rewrite the files and let Java
load each mutant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
